Flashing NodeMCU Firmware on ESP Board

NodeMCU is popular firmware for ESP8266 WiFi SoC. When you buy a NodeMCU ESP8266 board, it must have been flashed with the firmware. But, you can also flash it anytime by yourself, for example when you want custom NodeMCU firmware. For complete documentation of NodeMCU, you can see it here. There are a few steps to flash your board firmware. In this example, I use NodeMCU DevKit 1.0 with ESP-12E core which is easy to get in the market. If you use ESP-01, you need to see my other post about the ESP-01 flashing circuit.

1. Build the firmware. The easiest way is to build from the cloud, just follow the steps then the firmware will be sent to your email.

2. Install esptool.py. It is a python application to communicate with the ESP ROM bootloader. You can install it either from python package manager using pip install esptool or download manually from Github repository here.

$ git clone https://github.com/espressif/esptool.git

There are several other tools that you can use to flash the firmware, for example, NodeMCU PyFlasher with GUI which is also based on esptool.py.

3. Erase existing flash using esptool.py. In this example, my bord is connected to port /dev/ttyUSB0 with baud rate 9600.

$ ./esptool.py --port /dev/ttyUSB0 --baud 9600 erase_flash

4. Then, you can run esptool.py again to flash the firmware into your ESP board.

$ ./esptool.py --port /dev/ttyUSB0 --baud 9600 write_flash --flash_mode dio 0x00000 ../nodemcu-firmware/nodemcu-1.5.4.1-final-7-modules-2017-07-27-06-58-00-float.bin

The flash_mode is dio because the board flash memory size is greater than or equal to 4MB. If you use a board with a smaller memory size such as 512kB or 1MB like in ESP-01, the mode should be qio.

5. After the fourth step, your ESP board still cannot be programmed because the board needs SDK init data. All data in flash memory had been erased through the third step. The SDK init data is required to make firmware boot correctly and saved in the fourth sector from the end of flash memory. If you try to upload a certain Lua program file using nodemcu-tool it will always show an error message as follows.
[NodeMCU-Tool] Unable to establish a connection - Timeout, no response detected - is NodeMCU online and the Lua interpreter ready?
So, the next step is to download SDK init data from this repository. You can clone it and find the binary file in bin directory.

6. Upload the SDK init data to the correct address based on your board flash memory size. As I use NodeMCU DevKit 1.0 with 4MB of flash memory, the location is at 0x3fc000. If you use ESP-01 with 1MB of flash memory, it's at 0xfc000. You can see full information about SDK init data here. The process is the same as flashing the firmware.

./esptool.py --port /dev/ttyUSB0 --baud 9600 write_flash --flash_mode dio 0x3fc000 ../ESP8266_NONOS_SDK-2.1.0/bin/esp_init_data_default.bin

7. Now, you can try to run certain commands using any NodeMCU tool like nodemcu-tool. From my experience, after flashing the firmware, I need to redo certain commands a few times before it can work properly. For example, I run the following command four times before it can connect with the device.

$ nodemcu-tool mkfs --port /dev/ttyUSB0 --baud 9600
[NodeMCU-Tool] Do you really want to format the filesystem and delete all file ? (no) yes
[NodeMCU-Tool] Connected
[NodeMCU] Version: 2.1.0 | ChipID: 0x3bb3a4 | FlashID: 0x1640c8
[NodeMCU] Formatting the file system...this will take around ~30s
[NodeMCU] File System created | format done.

8. Done. Now, you can upload the program to your board. I prefer to use ESPlorer with GUI rather than nodemcu-tool.

ESP8266 WiFi NodeMCU

Comments

Configuring Swap Memory on Ubuntu Using Ansible

If we maintain a Linux machine with a low memory capacity while we are required to run an application with high memory consumption, enabling swap memory is an option. Ansible can be utilized as a helper tool to automate the creation of swap memory. A swap file can be allocated in the available storage of the machine. The swap file then can be assigned as a swap memory. Firstly, we should prepare the inventory file. The following snippet is an example, you must provide your own configuration. [server] 192.168.1.2 [server:vars] ansible_user=root ansible_ssh_private_key_file=~/.ssh/id_rsa Secondly, we need to prepare the task file that contains not only the tasks but also some variables and connection information. For instance, we set /swapfile as the name of our swap file. We also set the swap memory size to 2GB and the swappiness level to 60. - hosts: server become: true vars: swap_vars: size: 2G swappiness: 60 For simplicity, we only check the...

Deliver SaaS According Twelve-Factor App

If you haven't heard of the twelve-factor app , it gives us a recommendation or a methodology for developing SaaS or web apps structured into twelve items. The recommendation has some connections with microservice architecture and cloud-native environments which become more popular today. We can learn the details on its website . In this post, we will do a quick review of the twelve points. One Codebase Multiple Deployment We should maintain only one codebase for our application even though the application may be deployed into multiple environments like development, staging, and production. Having multiple codebases will lead to any kinds of complicated issues. Explicitly State Dependencies All the dependencies for running our application should be stated in the project itself. Many programming languages have a kind of file that maintains a list of the dependencies like package.json in Node.js. We should also be aware of the dependencies related to the pla...

Rangkaian Sensor Infrared dengan Photo Dioda

Keunggulan photodioda dibandingkan LDR adalah photodioda lebih tidak rentan terhadap noise karena hanya menerima sinar infrared, sedangkan LDR menerima seluruh cahaya yang ada termasuk infrared. Rangkaian yang akan kita gunakan adalah seperti gambar di bawah ini. Pada saat intensitas Infrared yang diterima Photodiode besar maka tahanan Photodiode menjadi kecil, sedangkan jika intensitas Infrared yang diterima Photodiode kecil maka tahanan yang dimiliki photodiode besar. Jika tahanan photodiode kecil maka tegangan V- akan kecil . Misal tahanan photodiode mengecil menjadi 10kOhm. Maka dengan teorema pembagi tegangan: V- = Rrx/(Rrx + R2) x Vcc V- = 10 / (10+10) x Vcc V- = (1/2) x 5 Volt V- = 2.5 Volt Sedangkan jika tahanan photodiode besar maka tegangan V- akan besar (mendekati nilai Vcc). Misal tahanan photodiode menjadi 150kOhm. Maka dengan teorema pembagi tegangan: V- = Rrx/(Rrx + R2) x Vcc V- = 150 / (1...

API Gateway Using KrakenD

The increasing demands of users for high-quality web services create the need to integrate various technologies into our application. This will cause the code base to grow larger, making maintenance more difficult over time. A microservices approach offers a solution, where the application is built by combining multiple smaller services, each with a distinct function. For example, one service handles authentication, another manages business functions, another maintains file uploads, and so on. These services communicate and integrate through a common channel. On the client side, users don't need to understand how the application is built or how it functions internally. They simply send a request to a single endpoint, and processes like authentication, caching, or database querying happen seamlessly. This is where an API gateway is effective. It handles user requests and directs them to the appropriate handler. There are several tools available for building an API gateway, su...

Deploying a Web Server on UpCloud using Terraform Modules

In my earlier post , I shared an example of deploying UpCloud infrastructure using Terraform from scratch. In this post, I want to share how to deploy the infrastructure using available Terraform modules to speed up the set-up process, especially for common use cases like preparing a web server. For instance, our need is to deploy a website with some conditions as follows. The website can be accessed through HTTPS. If the request is HTTP, it will be redirected to HTTPS. There are 2 domains, web1.yourdomain.com and web2.yourdomain.com . But, users should be redirected to "web2" if they are visiting "web1". There are 4 main modules that we need to set up the environment. Private network. It allows the load balancer to connect with the server and pass the traffic. Server. It is used to host the website. Load balancer. It includes backend and frontend configuration. Dynamic certificate. It is requ...

Headless CMS for Building API Endpoints

Recently, someone introduced me to a tool called Directus, which is used for building backend systems and defining data structures. This also reminded me of a product I reviewed about two years ago, which was also built using Directus. After doing some online research, I decided to test another headless CMS solution called Strapi. When we think of CMS platforms, names like WordPress, Joomla, or Moodle might come to mind. But what does 'headless' mean in this context? A headless CMS is a type of CMS that focuses solely on the backend system, without providing the frontend interface. It can generate the API endpoints, letting developers build the frontend or client-side application separately. However, this doesn't mean headless CMS platforms lack a user interface entirely. Most, like Directus and Strapi, include a UI tool (an administrator dashboard) for designing and managing the backend system and resources. After spending some time testing and reviewing Stra...

LUKI NOTES

Search This Blog